DTB firmware has the ability to grant you access to the premium channels on your decoder and some of these channels are also available on DSTV.Download the DTB firmware onto your Computer and extract the zip folder then transfer the .bin file in it to either your flash disk or memory card.
HOW TO ACCESS GOTV AND STARTIMES CHANNELS FOR FREE USING DTB FIRMWARE
Requirements
✅ A decoder with a USB port or the memory card slot
✅ Download the DTB firmware
steps
1️⃣ insert the memory stick or flash drive with the .bin file on your decoder and turn it ON
2️⃣ go to settings
3️⃣ go to upgrade section and choose the usb option. confirm
4️⃣ the upgrade process will begin and after a few minutes it will be over
5️⃣ switch off and on the decoder now
NOTE; If a ‘no match file’ error appears, make sure that you unzip the downloaded DTB firmware zip file and only copy the .bin file into the flash drive.
How To use
- Download dtb firmware unscramble file from this link
- Unzip the downloaded file.
- Save files to a usb flash disk or memory card.
- Plug the flash-drive to decoder/tv.
- Turn on the decoder/tv and go to Menu
- Select software update via USB
- Select okay if you are prompted to confirm the upgrade process.
- Let the upgrade run up to 100% without making any interruptions.
- Now restart the decoder/tv
Good day!
Based on the DTB Firmware, I want to ask that is it compatible with all Decoders whether H264/H265?
Thanks as I anticipate your response.